Garmin

Need to replace a split connector? Our replacement split connector helps you easily route cables during installation and eliminates the need to dr...

Steering ActuatorThis mechanical linear actuator mounts through the tilt tube of your kicker motor and is driven by the autopilot system to provide...

SeaStar Fittings KitFittings kit for plumbing your Garmin hydraulic autopilot for most SeaStar steering systems. What's In The Box?3 pieces of 1/4”...

Verado Adapter KitFittings kit for plumbing your Garmin hydraulic autopilot for most Verado steering systems. What's In The Box? 4 ¼” NPT to ORFS a...

1.2-Liter Pump KitUse Garmin's 1.2 Liter per minute (0.32 gallon per minute) pump kit with your Reactor™ 40 system to pump hydraulic fluid to the s...

Interconnect Cable (Steer-by-Wire)Use this 3 meter interconnect cable to connect your GHP™ Reactor autopilot CCU (couse computer unit) to a steer-b...

Interconnect Cable (Mechanical/Hydraulic w/SmartPump)Use this 5 meter interconnect cable to connect your GHP Reactor autopilot CCU (course computer...

Solenoid Power CableThis power cable integrates protection diodes and self-healing fuses to protect your ECU from hazardous voltages generated by h...

Class B Compact Drive UnitThe Class B Compact Drive Unit works with the GHP™ 12 marine autopilot system to control your sailboat's steering system....

ECU Power CableProvide power to your electronic control unit (ECU) with our ECU power cable. Simply wire the ECU power cable to your boat battery a...

GRF™ 10 Extension Cable (15M)Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 15M to your cable.WARNING: This product...

GRF™ 10 Extension Cable (5m)Help your GRF 10 rudder feedback sensor reach your GHP 12™ or GHP 20 by adding 5m to your cable.WARNING: This product c...

GRF™ 10 - Rudder Feedback SensorCompatible DevicesPair this sensor with the GHP 12™ to provide rudder position feedback and to detect and avoid rud...

Shadow DriveThe GHP™ 10's patented Shadow Drive technology gives boaters the security of knowing they maintain control even when relying upon the a...

Wire this buzzer to your course compass unit (CCU) to receive audible alerts from your GHP 10.WARNING: This product can expose you to chemicals whi...

Actuator Power Cable10" x 7" x 2" actuator power cable WARNING: This product can expose you to chemicals which are known to the State of California...

Rudder Feedback Cable5" x 5" x 1" rudder feedback cable WARNING: This product can expose you to chemicals which are known to the State of Californi...

Electronics Control Unit (ECU) Power Cable, Threaded Collar - 2.5mProvide power to your electronic control unit (ECU) with Garmin's electronic cont...

ECU/CCU Interconnect Cable Threaded CollarPart #: 010-11055-30Extend your bare wires and your ECU (electronic control unit) to CCU (course computer...

CCU Extension Cable 15MMount your CCU farther than 3 m (9.8') away from the ECU with a 5m (16.4'), 15m (49.2'), or 25m (82.0') extension cable.WARN...

CCU Extension Cable 5MMount your CCU farther than 3 m (9.8') away from the ECU with a 5 m (16.4'), 15m (49.2'), or 25m (82.0') extension cable.WARN...

Class B Drive UnitFor sailboats with up to 79,000 lbs. of displacementWARNING: This product can expose you to chemicals which are known to the Stat...

Class A Drive UnitFor sailboats with up to 28,500 lbs of displacementWARNING: This product can expose you to chemicals which are known to the State...

Verado Manifold Fitting Kit For 2.1 L PumpGarmin's Verado Manifold Kit is made specifically for a 2.1 L pump. The kit is an additional kit and acc...

5M Extension CableGarmin 5M (16.40 ft) extension cable for your GHP™ 10 is the perfect accessory for mounting the CCU further than 3M (9.84 ft) fro...