Curt Manufacturing
WHAT IS RACE GAS?
-
THE PROOF IS IN THE FORMULA
While Motorsports Fuel and Equipment was founded in 2011, development of its first product started three years earlier with an expensive race engine destroyed by bad racing fuel. While competing in a road course race, our founder burned a hole in the piston of a very expensive flat six motor. When the engine was torn down there were signs of detonation in each cylinder. Even though the pump at the track stated the fuel was 110 octane, the destroyed engine told a much different story.
At this point the search went out to find equipment that could be used to measure the octane of fuel before putting it in the tank. Options were very limited and extremely expensive. As it turns out there really is no easy or inexpensive way to test the octane of race fuel in the field. As a result we began to look at the problem from the other end, the race fuel itself.
Due to several changes in federal and Minnesota state law it is nearly impossible to legally transport large quantities of fuel by highway. So our search began for a product that we could add to pump gas to raise the octane and energy to that of race fuel. We found a few products that claim they could raise the octane but couldn't verify or guarantee the octane levels it could achieve. We also found some enthusiast websites that had recipes for "home brew" octane boost. When we analyzed these "home brews" we found that the components in these blends would damage the engine, not raise the octane significantly, or both.
Over the course of the next two years, we spoke with hundreds of experts and analyzed hundreds of blends. We created several "test candidates" that were tested by our two independent laboratory partners. After much searching, we finally came up with the one that we thought performed the best. As we moved forward to put this formula into production, the federal government stepped in. Our blend used too much organometallic compounds to be produced legally. While at the time we felt this was a huge setback, it actually turned out to be the giant leap forward.
The federal ban caused our several chemists and petrochemical suppliers to formulate the blend that became RACE GAS. When we tested this blend using ASTM D 2699 and 2700 tests, the new formula blended with pump gas produced results better than the formula originally banned by the Government. his blend performed better than anything else we had seen or tested! We had found the sweet spot for our product.
Since then we have used RACE GAS in everything from a 944 Turbo race car, a modified Audi TT, a Hemi Magnum, a Hemi Challenger, and modified VW R32, a Corvette and many other cars. All demonstrated increases in power, throttle response, and torque, (you can see the dyno test results of many of these cars on our test results page).
While we are thrilled to bring RACE GAS to the enthusiast market we are not satisfied there. Over the next year we will be launching several other motor sports products like RACE GAS Leaded formulation, RACE GAS Ctane, and RACE GAS Drag blends. It is our ongoing mission to bring high quality, unique, products to the motor sports market.
Euro Mount (2" Ball, 1-1/4" Shank, 3,500 lbs., 4-5/8" High, 7-1/4" Long)
Curt ManufacturingImagine a ball mount that requires no tools and no trailer ball torqueing for installation. In fact, it requires no trailer ball installation at al...
View full detailsCommercial Duty Forged Trailer Hitch Ball Mount, 2-1/2-Inch Receiver 20,000 lbs. GTW, 1-1/4-Inch Hole, 8-Inch Drop
Curt ManufacturingWhen it comes to towing on the job, there is no room for messing around. Either your equipment can get it done or it falls to the wayside. Give you...
View full detailsCommercial Duty Forged Trailer Hitch Ball Mount, 2-1/2-Inch Receiver 20,000 lbs. GTW, 1-1/4-Inch Hole, 6-Inch Drop, 4-1/2-Inch R
Curt ManufacturingWhen it comes to towing on the job, there is no room for messing around. Either your equipment can get it done or it falls to the wayside. Give you...
View full detailsIndustrial Duty Forged Trailer Hitch Ball Mount, Fits 3-Inch Receiver, 21,000 lbs. GTW, 1-1/4-Inch Ball Hole, 8-Inch Drop, 6-Inc
Curt ManufacturingThe CURT Industrial Duty ball mount features a 3" x 3" shank to fit heavy-duty 3" trailer hitches. The solid, forged steel construction and I-beam ...
View full detailsFusion Mount
Curt ManufacturingCurt Manufacturing 45136
Lifted Truck Trailer Hitch Ball Mount with 2-5/16-Inch Ball and Pin Fits 2 Receiver, 7,500 lbs. GTW, 6-Inch Drop
Curt ManufacturingWhen it comes to ball mounts, a CURT loaded ball mount is the complete package. These stingers come with all necessary towing components and are pr...
View full detailsLifted Truck Trailer Hitch Ball Mount with 2-Inch Ball and Pin Fits Receiver, 7,500 lbs. GTW, 6 Drop
Curt ManufacturingWhen it comes to ball mounts, a CURT loaded ball mount is the complete package. These stingers come with all necessary towing components and are pr...
View full detailsTowing Starter Kit with 2" Ball (2" Shank, 7,500 lbs., 4" Drop)
Curt ManufacturingThe towing starter kit by CURT Manufacturing is the most convenient way to get set up with the basic towing gear you will need for a brand new trai...
View full detailsTowing Starter Kit with 2" Ball (2" Shank, 7,500 lbs., 2" Drop)
Curt ManufacturingThe towing starter kit by CURT Manufacturing is the most convenient way to get set up with the basic towing gear you will need for a brand new trai...
View full detailsIndustrial Duty Forged Ball Mount (3" Shank, 21,000 lbs., 4" Drop, 9" Long)
Curt ManufacturingThe CURT Industrial Duty ball mount features a 3" x 3" shank to fit heavy-duty 3" trailer hitches. The solid, forged steel construction and I-beam ...
View full details3-in-1 ATV Ball Mount with 2" Shank and 1-7/8" Trailer Ball
Curt ManufacturingThere is nothing like the sense of freedom and adventure that comes with an ATV. Spinning through the mud, navigating a forest trail or simply driv...
View full detailsAdjustable Channel Mount with Dual Ball (2-1/2" Shank, 20,000 lbs., 6" Drop)
Curt ManufacturingIf you own multiple trailers or frequently tow a variety of loads, you know how much time and money are spent tailoring your towing system to each ...
View full detailsAdjustable Channel Mount with Dual Ball (2" Shank, 14,000 lbs., 6" Drop)
Curt ManufacturingIf you own multiple trailers or frequently tow a variety of loads, you know how much time and money are spent tailoring your towing system to each ...
View full detailsClevis Pin Ball Mount with 1" Diameter Pin (2" Shank, 6,000 lbs.)
Curt ManufacturingCURT specialty ball mounts are a group of exceptional towing products, built to succeed where others fear to tread. From the back roads of overrun ...
View full detailsSway Tab Ball Mount (2" Shank, 7,500 lbs., 2" Drop)
Curt ManufacturingCURT specialty ball mounts are a group of exceptional towing products, built to succeed where others fear to tread. From the back roads of overrun ...
View full detailsMulti-Use Ball Mount (2" Shank, 7,500 lbs., 5-13/16" Rise, 1" Ball Hole)
Curt ManufacturingCURT specialty ball mounts are a group of exceptional towing products, built to succeed where others fear to tread. From the back roads of overrun ...
View full detailsMulti-Ball Mount (2" Solid Shank, 2" & 2-5/16" Black Balls)
Curt ManufacturingIf you own more than one trailer, you know what a hassle it can be switching back and forth between ball mounts and keeping track of which ball mou...
View full detailsMulti-Ball Mount (2" Solid Shank, 1-7/8", 2" & 2-5/16" Chrome Balls)
Curt ManufacturingIf you own more than one trailer, you know what a hassle it can be switching back and forth between ball mounts and keeping track of which ball mou...
View full detailsMulti-Ball Mount (2" Solid Shank, 1-7/8", 2" & 2-5/16" Black Balls)
Curt ManufacturingIf you own more than one trailer, you know what a hassle it can be switching back and forth between ball mounts and keeping track of which ball mou...
View full detailsEuro Mount (1-7/8" Ball, 1-1/4" Shank, 3,500 lbs., 4-5/8" High, 7-1/4" Long)
Curt ManufacturingImagine a ball mount that requires no tools and no trailer ball torqueing for installation. In fact, it requires no trailer ball installation at al...
View full detailsEuro Mount (2" Ball, 1-1/4" Shank, 3,500 lbs., 5-1/8" High, 9-3/4" Long)
Curt ManufacturingImagine a ball mount that requires no tools and no trailer ball torqueing for installation. In fact, it requires no trailer ball installation at al...
View full detailsClass 2 Ball Mount (1-1/4" Shank, 3,500 lbs., 3-1/8" Rise, 11-1/4" Long)
Curt ManufacturingCURT class 2 ball mounts are designed to be fast, easy and reliable for your light-duty or standard-duty towing needs. We produce our class 2 ball ...
View full detailsClass 2 Ball Mount (1-1/4" Shank, 3,500 lbs., 3-1/4" Drop, 7-1/4" Long)
Curt ManufacturingCURT class 2 ball mounts are designed to be fast, easy and reliable for your light-duty or standard-duty towing needs. We produce our class 2 ball ...
View full detailsClass 2 Ball Mount (1-1/4" Shank, 3,500 lbs., 3-1/8" Rise, 9-3/4" Long)
Curt ManufacturingCURT class 2 ball mounts are designed to be fast, easy and reliable for your light-duty or standard-duty towing needs. We produce our class 2 ball ...
View full detailsClass 2 Ball Mount (1-1/4" Shank, 3,500 lbs., 1-1/4" Rise, 9-3/4" Long)
Curt ManufacturingCURT class 2 ball mounts are designed to be fast, easy and reliable for your light-duty or standard-duty towing needs. We produce our class 2 ball ...
View full detailsClass 2 Ball Mount (1-1/4" Shank, 3,500 lbs., 1-1/4" Drop, 6-3/4" Long)
Curt ManufacturingCURT class 2 ball mounts are designed to be fast, easy and reliable for your light-duty or standard-duty towing needs. We produce our class 2 ball ...
View full detailsClass 2 Ball Mount (1-1/4" Shank, 3,500 lbs., 1" Drop, 7-13/16" Long)
Curt ManufacturingCURT class 2 ball mounts are designed to be fast, easy and reliable for your light-duty or standard-duty towing needs. We produce our class 2 ball ...
View full detailsForged Tow Hook Mount (2" Shank)
Curt ManufacturingCURT specialty ball mounts are a group of exceptional towing products, built to succeed where others fear to tread. From the back roads of overrun ...
View full detailsCommercial Duty Forged Ball Mount (2-1/2" Shank, 20,000 lbs., 4" Drop)
Curt ManufacturingWhen it comes to towing on the job, there is no room for messing around. Either your equipment can get it done or it falls to the wayside. Give you...
View full detailsCommercial Duty Forged Ball Mount (2-1/2" Shank, 20,000 lbs., 2" Drop)
Curt ManufacturingWhen it comes to towing on the job, there is no room for messing around. Either your equipment can get it done or it falls to the wayside. Give you...
View full detailsClass 4 Ball Mount (2" Shank, 12,000 lbs., 8" Drop, 9-3/8" Long)
Curt ManufacturingWhen you demand more from your towing equipment, CURT heavy-duty ball mounts answer the call. For towing those especially heavy loads and bulky tra...
View full detailsCommercial Duty Ball Mount (2-1/2" Shank, 15,000 lbs., 3" Drop, 9-1/2" Long)
Curt ManufacturingCURT heavy-duty welded ball mounts are the pinnacle of the receiver-style ball mount design. They are built from CNC-formed steel and are robotical...
View full detailsForged Ball Mount (2" Shank, 17,000 lbs., 6" Drop, 9-1/2" Long)
Curt ManufacturingPushing the limits of standard towing, CURT forged ball mounts are a powerhouse among receiver-style ball mounts. With solid, one-piece constructio...
View full detailsForged Ball Mount (2" Shank, 17,000 lbs., 4" Drop, 8-1/2" Long)
Curt ManufacturingPushing the limits of standard towing, CURT forged ball mounts are a powerhouse among receiver-style ball mounts. With solid, one-piece constructio...
View full detailsForged Ball Mount (2" Shank, 17,000 lbs., 2" Drop, 8-1/2" Long)
Curt ManufacturingPushing the limits of standard towing, CURT forged ball mounts are a powerhouse among receiver-style ball mounts. With solid, one-piece constructio...
View full detailsClass 4 Ball Mount (2" Shank, 10,000 lbs., 8" Drop, 9-3/8" Long)
Curt ManufacturingWhen you demand more from your towing equipment, CURT heavy-duty ball mounts answer the call. For towing those especially heavy loads and bulky tra...
View full detailsClass 4 Ball Mount (2" Shank, 10,000 lbs., 6" Drop, 9-3/8" Long)
Curt ManufacturingWhen you demand more from your towing equipment, CURT heavy-duty ball mounts answer the call. For towing those especially heavy loads and bulky tra...
View full detailsLoaded Forged Ball Mount with 2-5/16" Ball (2" Shank, 15,000 lbs., 4" Drop)
Curt ManufacturingWhen it comes to ball mounts, a CURT loaded ball mount is the complete package. These stingers come with all necessary towing components and are pr...
View full detailsLoaded Forged Ball Mount with 2-5/16" Ball (2" Shank, 15,000 lbs., 2" Drop)
Curt ManufacturingWhen it comes to ball mounts, a CURT loaded ball mount is the complete package. These stingers come with all necessary towing components and are pr...
View full detailsClass 3 Ball Mount (2" Shank, 7,500 lbs., 4" Drop, 13" Long)
Curt ManufacturingCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for ...
View full detailsClass 3 Ball Mount (2" Shank, 7,500 lbs., 2" Drop, 12-1/4" Long)
Curt ManufacturingCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for ...
View full detailsClass 3 Ball Mount (2" Shank, 7,500 lbs., 2" Drop, 12-1/4" Long)
Curt ManufacturingCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for ...
View full detailsClass 3 Ball Mount (2" Shank, 5,000 lbs., 10" Drop, 14" Long)
Curt ManufacturingCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for ...
View full detailsClass 3 Ball Mount (2" Shank, 5,000 lbs., 10" Drop, 13" Long)
Curt ManufacturingCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for ...
View full detailsClass 3 Ball Mount (2" Shank, 5,000 lbs., 8" Drop, 11-1/2" Long)
Curt ManufacturingCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for ...
View full detailsClass 3 Ball Mount (2" Shank, 7,500 lbs., 6" Drop, 12-1/4" Long)
Curt ManufacturingCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for ...
View full detailsClass 3 Ball Mount (2" Shank, 7,500 lbs., 6" Drop, 9-1/4" Long)
Curt ManufacturingCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for ...
View full detailsClass 3 Ball Mount (2" Shank, 7,500 lbs., 4" Drop, 10-1/4" Long)
Curt ManufacturingCURT class 3, or standard-duty, ball mounts are a step up from classes 1 and 2. They feature a 2" x 2" shank and have a higher weight capacity for ...
View full details