Classic LP Gas Alarm Flush Mount White

Features:

• Advanced Technology - Alarm Mute button silences alarm while RV is ventilated. Rapid recovery sensor resets when silenced or reactivates alarm if dangerous levels of Propane remain
• Reliable - 12 Volt power means no missing or dead batteries to replace
• Durable - Built for the extreme RV environment
• Approved - Meets RVIA/NFPA requirements
• Listed to UL 1484 RV

Propane Gas Alarm Testing Procedures:

• Check date code on alarm. Replace if date has expired
• If device is battery operated, replace batteries
• Power up alarm - Alarm may flash green for up to 2 minutes after powering up
• Test electronics of device - The TEST button tests all ELECTRICAL functions of the alarm. It does not check the sensor operation. The alarm may be tested at any time. The TEST button is located on the front of the alarm. Press and hold the TEST button for 1 second. The alarm is working properly if the GREEN indicator light changes color to RED. IMPORTANT - If this alarm does not test properly return it immediately for repair or replacement
• Test Propane Gas sensor - Use Propane or Butane Gas to test the gas sensor. Note: It may take up to 10 seconds for the alarm to sound
• Review RV Safety Alarm Testing Procedures with renters and buyers